REVIEW: HP Pavilion w2207 Part 8Factory settings
The HP w2207 also comes with MyDisplay monitor software. After installation and update from the HP homepage, this software can be used in its full functional capacity. The user-friendly software contains a range of truly useful features such as a simple calibration assistant. The automatic turning function for the pivot feature can also be activated here.
The MyDisplay software offers a variety of additional features. The HP w2207 uses a TN panel that, according to the manufacturer, allows for a contrast ratio of 1000:1. Together with Hewlett Packard’s BrightView technology – a glossy or glare layer -, the monitor leaves the user with an extraordinarily good subjective impression of the image quality. The high black value produced by the good contrast characteristics is remarkable, at least for a TN panel monitor. However, the HP w2207 cannot achieve the excellent black values of a LCD monitor with a VA panel. Although BrightView produces a subjectively better black value and better colour brilliance, light falling onto the monitor is reflected more strongly than on a monitor with an Anti-Reflex layer. The reflection is most noticeable when the monitor is switched off; at these times the monitor could almost be used as a saving or cosmetics mirror.
Fortunately, the HP w2207 reflects the light significantly less strongly. Nonetheless, users with glossy panel monitors should take care that the monitor is situated in such a way that no window or other stronger light source is located in front of the screen.
When switched off the HP w2207 could be used as a mirror. The manufacturer advertises the maximum brightness as 300 cd/m². Our own measurements gave us a minimum brightness of an astonishingly low 6 cd/m² and a maximum of 259 cd/m². Since normal working brightness levels are generally between 120 and 150 cd/m², we consider the brightness resources on the w2207 to be absolutely sufficient. In terms of illumination, the HP w2207 is the best of all 22-inch widescreen LCDs tested by Prad so far. On out test model, only minimal lighter areas can be made out at the upper and lower panel edges when a completely black image is displayed (black screen saver) in a darkened room.
Brightness distribution in a darkened room in sRGB mode (around 200 cd/m²).
|